CodeWarrior for MCU v10.6 新特性-汽车电子-飞思卡尔技术社区
CodeWarrior for MCU v10.6 新特性
发布时间： 15:11:33
来源：飞思卡尔半导体
2014 年4 月2 日，Freescale 发布了CodeWarrior for MCU v10.6（简称 CW10.6） 。
CW10.6 平台集成了 Freescale ColdFire&, ColdFire+, DSC, Kinetis, Qorivva, RS08, S08 和 S12Z 开
&和以往 CW10 的其它老版本一样，CW10.6 有两个可供下载的版本：
1.& 在线安装版本（432M）： 下载的安装包包含 CW MCU v10.6的核心工具，
其他的安装包需要边安装边下载。这要求你安装的电脑能上网，而且网速
足够快。鉴于中国大陆地区的一般网络条件，我并不建议使用。
2.& 离线安装版本（1.37GB）：下载的安装包包括 CW MCU v10.6的所有安装文
件。既使安装的电脑不能上网，也能正常安装使用。
注意：CW10.6 是一个独立的完整的版本，在已经装有老版本的电脑上可以独立安装
CW10.6. 但不支持从老版本到新版本的直接升级。
和 CW10.5 比较，CW10.6 新增了对以下产品的支持：
&& Kinetis E 系列: MKE04Z8, MKE04Z64, MKE04Z128, MKE06Z64, MKE06Z128
&& Kinetis KEA 系列: SKEAZN16,& SKEAZN32, SKEAZN64, SKEAZ128
&& Kinetis K 系列: MK24FN1M0, MK63FN1M0, MK64FX512, MK64FN1M0
&& Kinetis V 系列: MKV10Z16, MKV10Z32
&& S08: HCS908RN8, HCS908RN16, HCS908RN32, HCS908RN48, HCS908RN60,
HCS908RNA2, HCS908RNA4, HCS908RNA8, HCS908RNA16, HCS908RNA32,
HCS908RNA48, HCS908RNA60&
&& S12Z: MC9S12ZVC64, MC9S12ZVC128, MC9S12ZVC192, MC9S12ZVHY32
&CW10.6 对以下芯片的支持进行了升级 ：
&& DSC: MC56F844xx, MC56F845xx, MC56F847xx
&& Kinetis E 系列: MKE02Z16, MKE02Z32, MKE02Z64 (40MHz)
&& S12Z: MC9S12ZVFP64, MC9S12ZVHY64
&& 对于 S12Z系列芯片，新增了 64bit& 'long long' 类型和 64-bit 浮点的支持
&& 对于 Kinetis V系列，支持平方根运算和硬件除法指令
&& 增加了对 P&E Cyclone Universal [FX]的支持
CW10.6 license 的使用和升级 ：
&& CW10.5的 license可用于 CW10.6.&&
&& 但更老版本的 license(i.e. 10.0, 10.1,10.2, 10.3,10.4)不能用于 CW10.6. 需要从 Freescale
购买升级后可以将 license升级
MQX 与CW10 的兼容性问题 ：
1． MQX3.8支持 CW10.1，不支持 CW10.6.
2． MQX3.8.1支持 CW10.2，不支持 CW10.6.
3． MQX 4.0 是为 CW10.2和 CW10.3 而设计，在 CW10.6上已通过测试。
4． MQX 4.0.1 是为 CW10.4而设计, 在 CW10.6上已通过测试。
5． MQX 4.0.2是为 CW10.4和 CW10.5而设计,在 CW10.6上已通过测试。
6． MQX 4.1 是为 CW10.5而设计, 在 CW10.6上已通过测试。
7． CW10.6 集成了 MQX Lite RTOS.支持 Kinetis L 和 Kinetis K系列
8．& CW10.6 集成了 MQX Task Aware 调试器, 支持对 MQX和 MQX Lite的调试
Tel: 3-8060
备案号: 苏ICP备号-2codewarrior介绍及安装流程_百度文库
两大类热门资源免费畅读
续费一年阅读会员，立省24元！
评价文档：
喜欢此文档的还喜欢
codewarrior介绍及安装流程
阅读已结束，如果下载本文需要使用
想免费下载本文？
把文档贴到Blog、BBS或个人站等：
普通尺寸(450*500pix)
较大尺寸(630*500pix)
你可能喜欢
20080份文档RVDS2.2破解版安装教程_百度文库
两大类热门资源免费畅读
续费一年阅读会员，立省24元！
评价文档：
喜欢此文档的还喜欢
RVDS2.2破解版安装教程
R​C​D​S. ​破​解​版​安​装​教​程​ ​非​常​详​细
阅读已结束，如果下载本文需要使用
想免费下载本文？
把文档贴到Blog、BBS或个人站等：
普通尺寸(450*500pix)
较大尺寸(630*500pix)
你可能喜欢theme：RVDS2.2安装步骤
author：Jeff.Xue
contact information：
安装环境：window7
CPU：AMD（对安装会有影响，查看最后面排除CPU引起错误说明）
1.下载rvds2.2的压缩包(下载地址:)解压,进入目录
2.进入Crack文件夹,双击运行keygen.exe,然后点击Generate来生成license.dat
3.在C盘的根目录下创建一个名为flexlm的文件夹,将刚才生成的license.dat拷贝进去，同时将LM_LICENSE_FILE = c:\flexlm\license.dat&加入到环境变量中
4.运行Crack文件夹中的patch.exe进行打补丁（否则安装到100%之后会提示错误，无法安装成功）:
&&%Install Path%\IDEs\CodeWarrior\CodeWarrior\5.6.1\1592\win_32-pentium\bin\Plugins\License\oemlicense.dll （该文件没有找到，我直接跳过了）
& %Install Path%\IDEs\CodeWarrior\RVPlugins\1.0\86\win_32-pentium\oemlicense\oemlicense.dll&
& %Install Path%\RDI\armsd\1.3.1\66\win_32-pentium\armsd.exe&
& %Install Path%\RDI\AXD\1.3.1\98\win_32-pentium\axd.exe&
& %Install Path%\RVCT\Programs\2.2\349\win_32-pentium\armasm.exe&
& %Install Path%\RVCT\Programs\2.2\349\win_32-pentium\armcc.exe&
& %Install Path%\RVCT\Programs\2.2\349\win_32-pentium\armcpp.exe&
& %Install Path%\RVCT\Programs\2.2\349\win_32-pentium\armlink.exe&
& %Install Path%\RVCT\Programs\2.2\349\win_32-pentium\fromelf.exe&
& %Install Path%\RVCT\Programs\2.2\349\win_32-pentium\tcc.exe&
& %Install Path%\RVCT\Programs\2.2\349\win_32-pentium\tcpp.exe&
& %Install Path%\RVD\Core\1.8\734\win_32-pentium\bin\tvs.exe&
& %Install Path%\RVD\Core\1.8\734\win_32-pentium\bin\xry100.dll&
& %Install Path%\RVARMulator\ARMulator\1.4.1\206\win_32-pentium\armiss.sdi&
& %Install Path%\RVARMulator\ARMulator\1.4.1\206\win_32-pentium\armulate.sdi&
& %Install Path%\RVARMulator\ARMulator\1.4.1\206\win_32-pentium\v6armiss.sdi&
& %Install Path%\RVARMulator\v6ARMulator\1.4.1\238\win_32-pentium\v6thumb2.sdi&
& %Install Path%\RVARMulator\v6ARMulator\1.4.1\238\win_32-pentium\v6trustzone.sdi
5.由于CPU为ADM的，在安装过程中会出现很多出现很多Error: %variable HOSTPLAT is not defined in File RDI\armsd\1.3.1\66\install.xml
为了排除该错误只需要进行如下操作：把安装目录中的RDI/ARMSD/1.3.1/66下的INSTALL.XML与utilities/installer/1.6/43下的install.xml中的%（HOSTPLAT）%替换为%(FS)win_32-pentium%
6.进入rvds2.2目录下运行setup安装，安装到达lincense验证页面时，选择C:/flexlm目录下的license.dat 继续安装
* 以上用户言论只代表其个人观点，不代表CSDN网站的观点或立场
访问：21208次
排名：千里之外
原创：22篇
评论：11条Suite Switcher 4.0 ARM工具套件ADS、RVDS切换工具
软件大小：7.8 MB
软件性质：
更新时间： 13:41:33
应用平台：Win9X/Win2000/WinXP
下载次数：1562
下载来源：米尔科技
软件语言：英文
软件类别：ARM开发工具 & 实用工具
Suite Switcher 4.0 (c) ARM Ltd .
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Introduction
-=-=-=-=-=-=-
RealView Development Suite (RVDS) provides RealView Compilation Tools (RVCT),
RealView Debugger (RVD), Instruction Set Simulation Model (ISSM) and RealView
Instruction Set Simulator (RVISS) ARMulators, as well as either Eclipse or
CodeWarrior.
ARM Developer Suite (ADS) provides CodeWarrior, AXD and earlier generations
of compilation tools and ARMulator.
Although most users will install only one set of development tools, in some
circumstances you may wish to have both ADS and/or multiple versions of
RVDS (e.g. RVDS 3.0 and RVDS 3.1) installed at the same time.
For example:
- You may wish to use the ADS compilation tools for building
& your application code, but RVD and RVISS ARMulator for
& debugging.
- You may wish to use the RVCT tools for building your
& application code, but AXD for debugging.
- You may wish to compare code-generation improvements between two versions
& of RVDS and it is convenient to have them both installed at the same time.
This utility allows you to easily configure your PC for any of
the above three examples and will carry out all necessary setup of
environment variables.
1) This utility only switches between compilers and ARMulators.
& &If both developer suites are installed, then AXD and RVD
& &should both be accessible regardless of any settings made
& &using Suite Switcher.
2) The CodeWarrior application provided as part of ADS cannot be
& &used with the RVDS 2.0 or 2.1 compilers. If you are using RVDS 2.2 it
& &will include a newer version of CodeWarrior that works with RVCT 2.2.
& &You can use the mcp2make utility available from the Technical
& &Support area of
to convert CodeWarrior projects to
& &makefiles. When you activate a suite which includes CodeWarrior
& &(e.g. ADS 1.2, RVDS 2.2) it will also activate the correct version of
& &CodeWarrior and change any relevant file associations to open with
& &that version of CodeWarrior (i.e. .c files open with CodeWarrior).
3) RVDS 2.1 also includes AXD 1.3, in addition to AXD 1.2 which
& &included with ADS 1.2.1. Only one version of AXD may be
& &registered to operate at a time. You must choose which version
& &of AXD to register. Suite Switcher allows you to choose the
& &version of AXD to register. This mainly applies to running AXD
& &from the Start menu. It is possible run the unregistered AXD
& &from the command line. If AXD 1.2 is registered and RVDS is
& &active, and you type 'axd' from the command-line, you will
& &start AXD 1.3 (because it is on the search path) which is
& &not the registered version of AXD.
Installing Suite Switcher
-=-=-=-=-=-=-=-=-=-=-=-=-
You must use a login with administrator privileges to install Suite Switcher.
If you are using a previous version of Suite Switcher you must uninstall it
before installing this version of Suite Switcher. To uninstall an earlier
version of Suite Switcher use the Add or Remove Programs control panel.
Using Suite Switcher
-=-=-=-=-=-=-=-=-=-=-
It is recommended that you quit AXD, RVD, CodeWarrior, etc. before using
SuiteSwitcher to activate another suite/debugger.
Starting Suite Switcher presents the user with a simple dialog
box with two groups of radio buttons - one labeled "Suite" to
choose which developer suite to enable (e.g. ADS 1.2.1, RVDS 2.1)
and another group labeled "AXD" to choose which version of AXD to
register for operation. The selected radio buttons indicate
which developer suite is currently active or which version of
AXD is registered. There is also a small text field below the
radio buttons describing the currently active developer suite and
registered version of AXD.
If no radio button is selected for the Suite group, then no
developer suite is fully active, which can lead to unpredictable
behaviour. In normal usage of the tools, this will happen after
installing or uninstalling a second developer suite (as some
environment variables will be set for RVDS and other environment
variables set for ADS). Selecting one of the radio buttons will
then fully enable one developer suite and disable the other.
The change takes place immediately, so there is no need to exit
Suite Switcher or restart your machine. However, any open DOS
windows will not be notified of the change. You will need to
open a new DOS window to execute any newly activated suite-
related tools (e.g. armcc) from the command line.
Suite Switcher will also set an environment variable called
ARM_CURRENT_SUITE which indicates the name of the most recently activated
developer suite. For exmaple, if you last activated RVDS 2.1:
& & ARM_CURRENT_SUITE = RVDS 2.1 [Build 69]
This can be useful for setting the title of an open DOS window using the
& &C:\&title %ARM_CURRENT_SUITE%
Supported Suites
-=-=-=-=-=-=-=-=-
Suite Switcher supports the following developer suites:
* ADS 1.0.1 - ADS 1.2.1
* RVCT for BREW 1.2 - 3.0
* RVDS 2.0 - RVDS 4.0 Pro
* RVDK for ARM7 Processor Family (Chinese edition)
* RVDK for Oki
* RVDK for Philips
* RVDK for Philips Nexperia Sy.Sol
* RVDK for STMicroelectronics
What does Suite Switcher actually do?
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Suite Switcher carries out two types of changes to the system in
order to switch between the ADS and RVDS compilers/ARMulator.
First, it modifies the system path to contain the path to the tools for the
active suite and it removes all other development suites from the path.
This primarily affects which version of the compiler is found if executed
from the command line.
Additionally, it restores the environment variables for the
active suite to their default values. In particular, the ADS
ARMulator and the RVDS ARMulator both use the same environment
variables: ARMCONF and ARMDLL. Suite Switcher ensures that
ARMCONF and ARMDLL are set correctly for the active developer
AXD contains a number of OCX controls which must be registered
with the operating system. When you select a version of AXD to
register, Suite Switcher runs a batch file to register the OCX
controls for that version of AXD.
本类下载TOP10
常见问题解答
| (C) 2014 Myir
深圳总部: 5 | 北京办事处: 010- | 上海办事处: 021-
粤ICP备号-1