君，已阅读到文档的结尾了呢~~
abstract 流程图 护照办理流程 115提取 公积金提取 港澳通行证办理流程 装修流程 淘宝开店流程 115提取码 住房公积金提取条件
扫扫二维码，随身浏览文档
手机或平板扫扫即可继续访问
Abstract提取LEF详细流程[forencounter]
举报该文档为侵权文档。
举报该文档含有违规或不良信息。
反馈该文档无法正常浏览。
举报该文档为重复文档。
推荐理由：
将文档分享至：
分享完整地址
文档地址：
粘贴到BBS或博客
flash地址：
支持嵌入FLASH地址的网站使用
html代码：
&embed src='/DocinViewer-4.swf' width='100%' height='600' type=application/x-shockwave-flash ALLOWFULLSCREEN='true' ALLOWSCRIPTACCESS='always'&&/embed&
450px*300px480px*400px650px*490px
支持嵌入HTML代码的网站使用
您的内容已经提交成功
您所提交的内容需要审核后才能发布，请您等待！
3秒自动关闭窗口Cell Squeezing as a Robust, Microfluidic Intracellular Delivery Platform | Protocol
Bioengineering
Fill out the form below to receive a free trial:
Enter your email below to get your free 10 minute trial to JoVE!
Select a Country
United States
Afghanistan
American Samoa
Antarctica
Antigua and Barbuda
Azerbaijan
Bangladesh
Bosnia and Herzegowina
Bouvet Island
British Indian Ocean Territory
Brunei Darussalam
Burkina Faso
Cape Verde
Cayman Islands
Central African Republic
Christmas Island
Cocos (Keeling) Islands
Congo, the Democratic Republic of the
Cook Islands
Costa Rica
Cote d'Ivoire
Croatia (Hrvatska)
Czech Republic
Dominican Republic
East Timor
El Salvador
Equatorial Guinea
Falkland Islands (Malvinas)
Faroe Islands
France Metropolitan
French Guiana
French Polynesia
French Southern Territories
Guadeloupe
Guinea-Bissau
Heard and Mc Donald Islands
Holy See (Vatican City State)
Iran (Islamic Republic of)
Kazakhstan
Korea, Democratic People's Republic of
Korea, Republic of
Kyrgyzstan
Lao, People's Democratic Republic
Libyan Arab Jamahiriya
Liechtenstein
Luxembourg
Macedonia, The Former Yugoslav Republic of
Madagascar
Marshall Islands
Martinique
Mauritania
Micronesia, Federated States of
Moldova, Republic of
Montserrat
Mozambique
Netherlands
Netherlands Antilles
New Caledonia
New Zealand
Norfolk Island
Northern Mariana Islands
Papua New Guinea
Philippines
Puerto Rico
Russian Federation
Saint Kitts and Nevis
Saint Lucia
Saint Vincent and the Grenadines
San Marino
Sao Tome and Principe
Saudi Arabia
Seychelles
Sierra Leone
Slovakia (Slovak Republic)
Solomon Islands
South Africa
South Georgia and the South Sandwich Islands
St. Helena
St. Pierre and Miquelon
Svalbard and Jan Mayen Islands
Switzerland
Syrian Arab Republic
Tajikistan
Tanzania, United Republic of
Trinidad and Tobago
Turkmenistan
Turks and Caicos Islands
United Arab Emirates
United Kingdom
United States Minor Outlying Islands
Uzbekistan
Virgin Islands (British)
Virgin Islands (U.S.)
Wallis and Futuna Islands
Western Sahara
Yugoslavia
Select a Role
Administrator
Technician
Select a State
California
Connecticut
Massachusetts
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Pennsylvania
Rhode Island
South Carolina
South Dakota
Washington
West Virginia
Select a Province
British Columbia
New Brunswick
Newfoundland and Labrador
Northwest Territories
Nova Scotia
Prince Edward Island
Saskatchewan
Select a Province
Beijing Municipality
Chongqing Municipality
Heilongjiang
Inner Mongolia
Shanghai Municipality
Tianjin Municipality
Select your field of expertise
Neuroscience
Immunology and Infection
Bioengineering
Engineering
Environment
Developmental Biology
Biochemistry
Cancer Research
By clicking "Submit," you agree to our .
Rapid mechanical deformation of cells has emerged as a promising, vector-free method for intracellular delivery of macromolecules and nanomaterials. This protocol provides detailed steps on how to use the system for a broad range of applications.
Cite this Article
Sharei, A., Cho, N., Mao, S., Jackson, E., Poceviciute, R., Adamo, A.,
et al. Cell Squeezing as a Robust, Microfluidic Intracellular Delivery Platform. J. Vis. Exp. (81), e50980, doi:10. (2013).
Rapid mechanical deformation of cells has emerged as a promising, vector-free method for intracellular delivery of macromolecules and nanomaterials. This technology has shown potential in addressing previously chal including, delivery to primary immune cells, cell reprogramming, carbon nanotube, and quantum dot delivery. This vector-free microfluidic platform relies on mechanical disruption of the cell membrane to facilitate cytosolic delivery of the target material. Herein, we describe the detailed method of use for these microfluidic devices including, device assembly, cell preparation, and system operation. This delivery approach requires a brief optimization of device type and operating conditions for previously unreported applications. The provided instructions are generalizable to most cell types and delivery materials as this system does not require specialized buffers or chemical modification/conjugation steps. This work also provides recommendations on how to improve device performance and trouble-shoot potential issues related to clogging, low delivery efficiencies, and cell viability.
Introduction
Delivery of macromolecules to the cell cytoplasm is a critical step in therapeutic and research applications. Nanoparticle mediated delivery, for example, has shown potential in gene therapy1,2, while protein delivery is a promising means of affecting cellular function in both clinical3 and laboratory4 settings. Other materials, such as small molecule drugs, quantum dots, or gold nanoparticles, are of interest in applications ranging from cancer therapeutics5,6 to intracellular labeling7,8, and single molecule tracking9.
The cell membrane is largely impermeable to macromolecules. Many existing techniques use polymeric nanoparticles10,11, liposomes12, or chemical modifications13 to facilitate membrane disruption or endocytotic delivery. In these methods, the delivery efficiency and
are often dependent on the structure of the target molecule and the cell type. These methods can be efficient at the delivery of structurally uniform materials, such as nucleic acids, but are often ill-suited for the delivery of more structurally diverse materials, such as proteins14,15 and nanomaterials7. Moreover, the endosome disruption mechanism that most of these methods rely on is often inefficient, hence leaving much material trapped in vesicle structures16. Finally, methods that are often developed for use with established
do not translate well to primary cells.
Membrane poration methods, such as electroporation17,18 and sonoporation19, are an attractive alternative
however, they are known to cause low cell viability and can be limited by the charge of the target delivery material.
Rapid mechanical deformation of cells, a microfluidic approach to delivery, has recently demonstrated its advantages over current techniques in the context of cell reprogramming20 and nanomaterial delivery21. This method relies on mechanical disruption o the cell membrane to facilitate cytosolic delivery of materials present in the surrounding buffer. The system has demonstrated enabling potential in previously challenging cell types (e.g. primary immune cells and stem cells) and materials (e.g. antibodies and carbon nanotubes). Herein, the general procedure to use these devices for intracellular delivery of target macromolecules is described. The procedure is generalizable to most cell types an however, it is recommended that one conduct a brief optimization of conditions, as detailed in our previously reported design guidelines20, for any previously unreported applications. To date, the system has been used successfully for the delivery of RNA, DNA, gold nanoparticles, quantum dots, carbon nanotubes, proteins, and dextran polymers20,21.Subscription Required. Please recommend JoVE to your librarian.
1. Storage
Store the reservoirs, holders, O-rings and microfluidic devices in 70% ethanol. Use a container (e.g. jar or beaker) that has a lid to prevent evaporation and contamination by dust or outside particles. Place the devices in one container (1), reservoirs and O-rings in a second container (2), and holders in the third (3).
Note: The use of 70% ethanol for storage is to maintain sterility. If the only components of the
are ethanol and water (i.e. no denaturing agents), all system components should be fully compatible and will not degrade over time.
Change ethanol solution in containers (2) and (3) before each use to prevent cross-contamination across experiments and minimize the presence of unwanted particles that can cause clogging.
2. Experiment Preparation
Place containers (2) and (3) in an ultrasound bath for 5-10 min before each use. This helps remove any contaminating particles from previous experiments.
Clean workspace in
with 70% ethanol solution.
Spray all materials (3 containers, and tweezers) with a 70% ethanol solution before placing them inside the biosafety cabinet.
3. Assembly
Set down 2-3 low-lint wipes in the work area.
Remove plastic reservoirs from their container with tweezers and set them on the wipes to facilitate evaporation of ethanol solution from inner surfaces. Gently tap the reservoirs on the surface or blow air through them to facilitate removal of the ethanol solution.
Insert O-rings into their appropriate slot on the reservoirs.
Remove the holder and chips from respective containers and allow ethanol to evaporate (~1-2 min).
Use tweezers to place the desired chip face-up (i.e. access holes up) in the holder. Raise the holder with the chip to eyelevel to make sure the chip is lying flat in the holder and adjust if necessary with the tweezers. IMPORTANT: If the device does not fit properly in its holder, there is a risk that it will break during the subsequent steps.
Next, gently place the reservoirs on the holder and align them with the clips. Be careful that O-rings do not fall out of their slots during this process.
Gently press down on the reservoirs until they click into place. Ensure that both sides of the reservoirs are secure and that the chip appears to be in the correct position.
4. Cell Preparation
(primary or established lines): Plate cells 1-2 days prior to the experiment such that they are no more than 80%
on the day of the experiment.
Place cells in suspension (in PBS or relevant media) and aim for an operating
of 1.0 x 106 cells/ml to 1.0 x 107 cells/ml. NOTE: We have not observed significant changes in delivery performance due to cell concentration.
Mix cells and the desired delivery material in a separate tube to obtain the desired material concentration for the experiment. IMPORTANT: Because the described delivery method relies on diffusion to facilitate delivery, a higher material concentration will yield higher delivery. If possible, it is recommended to use a 1 µM solution of the desired material for initial trials. This concentration can then be titrated down in future experiments as needed. The lowest reported concentration used with this device is 10 nM21.
5. Operation
Pipette mixture of cells and delivery material into a reservoir (current design has a max 150 µl capacity). NOTE: Most device designs are fully reversible therefore direction of flow through the channels does not matter. Samples may be loaded into either of the two reservoirs.
Attach pressure tubing to the filled reservoir and tighten the nut to ensure proper sealing (finger tight is often sufficient).
Adjust pressure to the desired level on the regulator. This controls the speed at which cells travel through the device. Note that cell flow does not start until button is pressed.
NOTE: In previous work, nitrogen or compressed air have worked equally well as the carrier gas.
Raise device to eye level and orient it so that the liquid in the reservoir is easily visible. NOTE: Track the liquid column to shut off the system before the reservoir is emptied.
Press the button to pressurize the reservoir and begin cell flow.
When the liquid level is approximately 2 mm from the bottom of the reservoir, quickly turn the regulator to 0 psi to stop flow. IMPORTANT: If one fails to stop the flow before the reservoir is emptied, one risks ejecting the sample from the collection reservoir. Also note that if the fluid column is not moving at an appreciable pace, or has slowed substantially relative to its initial flow rate (e.g. 3x slower), the mounted device is probably clogged and needs to be exchanged. Operating a clogged device can lead to higher cell death.
Collect the treated cells from the appropriate reservoir and place them in the desired collection tube/plate. IMPORTANT: Do not
the collected cells in any buffers at this stage as the porated cells will continue to uptake material for up to 10 min20. After this window has passed, dilute the cells in the desired media/buffer.
To collect more treated cells or try alternative experimental conditions, repeat steps 5.1 - 5.7 as needed. Recall that the chips are reversible, therefore samples can be mounted in either reservoir. Be sure to exchange chips as needed if they clog. Discard clogged devices.
6. Disassembly
Gently disconnect the reservoirs from the main holder by pushing aside the clip arms.
Place each part in the appropriate storage container (detailed in section 1).
Place used chips in a separate container for disposal.
Subscription Required. Please recommend JoVE to your librarian.
Representative Results
Figure 1 contains a descriptive schematic of the microfluidic delivery system. Figures 2a-b illustrate typical results from treating
cells with different device designs in the presence of fluorescently conjugated 3 kDa dextran20. If the procedure is followed correctly, system performance will be sensitive to device type and operating speed. Therefore, one should optimize these conditions for a given application before proceeding to more complex experiments. In the range of operating conditions illustrated in the figure, cell viability remains above 80%, however, one must note that suboptimal delivery parameters (e.g. inappropriate chip type) could lead to viabilities below 30%. Thus viability and delivery efficiency must be optimized simultaneously for any previously unreported cell type. If a device design is inappropriate for the target cell type, one will see results ranging from no delivery to high cell death (e.g. 10% viability). If the experimental conditions were inappropriate, for example the target material bound to the cell surface, one may not be able to measure the delivery accurately as the surface binding signal can mask the cytoplasmic signal.
Figures 2c-d illustrate our preferred method for measuring delivery efficiency within the live cell population. The control case in Figure 2c is meant to reflect all surface binding and endocytotic effects as the cells are exposed to the delivery material for at least as long as the treated cases. The delivered cell population is defined as the unshaded region such that only 1-5% of the control population falls within that region. Note that previous work has established that delivery in this approach is not mediated by endocytosis20. The double-peak distribution observed in the delivered example is not necessarily characteristic of the system as we have observed more and less uniform distributions for different experimental conditions.
Figure 1. Schematic of the full system and its interface to the microfluidic devices. .
Figure 2. Representative results with HeLa cells20. a) Delivery efficiency and b) cell viability of HeLa cells treated by 3 different device designs in the presence of cascade blue conjugated 3 kDa dextran (0.2 mg/mL). In these experiments, the cell solution was at a concentration of 106 cells per mL in PBS containing 3% fetal bovine serum and 1% F68 pluronics. Viability was measured by propidium iodide staining of dead cells and delivery results are shown for live cells only. All data points were run in triplicate, and error bars represent 2 SDs. c) A representative histogram for an experimental control where HeLa cells were exposed to cascade blue conjugated 3 kDa dextran for at least the same amount of time as a device treated case. d) The corresponding case where the cells were passed through the device to facilitate delivery. The fraction of the live cell population that is in the unshaded region of the histogram is defined as the ‘delivered’ population. .Subscription Required. Please recommend JoVE to your librarian.
Discussion
Certain aspects of the described experimental procedure (i.e. factors other than chip design and operating speed) may need to be optimized depending on the cell type and delivery material the system is applied to. The discussion that follows addresses some of the most common factors to consider when designing experiments.
To improve the delivery signal for fluorescently labeled compounds, one needs to address sources of background fluorescence. Surface binding and endocytosis, for example, can be addressed by washing cells 5-10 min after delivery to remove excess material before culture or further processing. If electing to forgo a wash step, it would be best to dilute the treated cells by 5-10x in the desired media to lower the concentration of target material in the surrounding solution and hence reduce endocytotic rates. In some cases, for example protein delivery, one may find it necessary to actively block the cell surface (e.g. using unlabeled bovine serum albumin) to minimize non-specific binding of the delivery material. In a given application, if the fluorescence intensity of the untreated case, as measured by flow cytometry, is over one decade lower than the endocytosis control then surface binding/endocytosis may be an issue. Note that issues with background signal are only relevant for direct fluorescent detection of the delivery material, functional assays (e.g. cell reprogramming) are usually unaffected as endocytosed or surface bound material are often inactive.
To improve the viability of cells after treatment, one needs to minimize the amount of processing post-delivery. It is recommended that one avoid excessive
or wash steps and transfer cells into their desired media in an incubator 5-10 min after delivery is complete. In adherent lines, cells are often fully adhered and dividing within 24 hr after treatment. As discussed previously20, we have not observed any long-term side-effects from the use of this technique.
The microfluidic devices used in this delivery system are prone to clogging over time. Clogs often form at the constriction as it is the narrowest feature on the device. Clogging can be caused by damaged cells or by environmental contaminants. The latter's effect can be minimized by ensuring a clean, dust-free environment for operating the devices (e.g. a well maintained biosafety cabinet). For cell lines, we recommend
1-2 days prior to delivery so as to minimize the presence of cell debris in the resulting suspension. When operating the device, one must be mindful of the volumetric flow rate of the fluid in the reservoir. If the flow rate drops to under a third of its initial rate, the device may be causing excessive cell death and should be exchanged, or the direction of flow reversed. Potential clogging issues can also be mitigated by passing the cell suspension through a 40 μm cell strainer mesh. This process ensures a single cell suspension thereby preventing potential clogs from forming in the wider, low flow rate sections of the chip.
When designing experiments for different delivery materials, one must account for the size of the target material and its concentration. As this technology relies on the passive diffusion of material across the disrupted cell membrane, the
concentration gradient and the hydrodynamic radius of the delivery material will govern the rate of mass transfer - assuming the membrane disruptions are large enough to accommodate the material. It is thus advisable to use high molar
(e.g. 1 µM) of large target materials relative to their smaller counter parts. The technique has demonstrated effective delivery at concentrations as low as 10 nM in the case of quantum dot delivery21. Moreover, the technique is not thought to be limited by the nature of the target delivery material except in the context of material size and diffusivity (i.e. low diffusivity materials will have lower delivery efficiencies and material larger than the size of the disruptions probably cannot enter the cytoplasm).
Studies in cell reprogramming and quantum dot delivery have illustrated the strengths of the cell squeezing approach relative to
Based on the current understanding of the membrane disruption mechanisms in these two techniques, it would appear that cell squeezing has a significant advantage in applications involving proteins, small molecules, and nanomaterials20,21. The contrast between the two methods in applications involving
(which are highly charged compared to the aforementioned materials) is unclear.
This microfluidic approach to delivery relies on mechanical disruption of the cell membrane to facilitate passive diffusion of material into the cell and has been shown to be applicable to a range of cell types20. The system is thus in principal appropriate for the cytosolic delivery of almost any material to almost any cell type. We believe the system's advantages are most pronounced in cases involving traditionally difficult to transfect primary cells (e.g. immune and stem cells) and conventionally challenging materials (e.g. proteins, quantum dots, carbon nanotubes, and RNA). The aforementioned potential in immune and stem cell applications is emphasized by the shortcomings of traditional delivery methods in addressing these cell types. However, the system may require further improvement to facilitate gene delivery by
vectors as these applications require delivery to the nucleus. In summary, we believe the microfluidic deformation approach to delivery can potentially address many existing challenges to intracellular delivery. The system's independence from chemical vectors or electric fields enables its robust application to a range of studies. The instructions provided herein should enable any interested researchers to operate such a system independently and adapt it for their research purposes.Subscription Required. Please recommend JoVE to your librarian.
Disclosures
The authors Armon Sharei, Robert Langer, and Klavs F. Jensen are shareholders of SQZ Biotechnologies Company that produces the microfluidic devices used in this article.
Acknowledgements
We thank T. Shatova for helpful discussion on experimental design and data analysis. The assistance and expertise of G. Paradis, the personnel of the flow cytometry core at the Koch Institute, and the staff of the Microsystems Technology Laboratory at Massachusetts Institute of Technology are gratefully acknowledged. This work was supported by National Institutes of Health Grants RC1 EB, DE013023, DE016516, EB000351, and partially by National Cancer Institute Cancer Center Support (Core) Grants P30-CA14051 and MPP-09Call-Langer-60.
Catalog Number
Device Holder & Plastic reservoir
SQZ Biotechnologies
LSRFortessa Analyzer
Becton Dickinson
Flow cytometry machine used at the Koch Institute Core Facilities
Microfluidic device
SQZ Biotechnologies
Cell Squeeze
Pressure system to operate device
SQZ Biotechnologies
Pressure System
Ultrasound bath
References
Schaffert, D., Wagner, E.
Gene. Ther. 15,
Whitehead, K. A., Langer, R., Anderson, D. G.
Nat. Rev. Drug Discov. 8, 129-138 (2009).
Leader, B., Baca, Q. J., Golan, D. E.
Nat. Rev. Drug Discov. 7, 21-39 (2008).
Kim, D., et al.
Cell Stem Cell. 4, 472-476 (2009).
Dhar, S., Daniel, W. L., Giljohann, D. A., Mirkin, C. A., Lippard, S. J.
J. Am. Chem. Soc. 131,
Jiang, Z. -X., Zhang, Z. -Y.
Cancer and Metastasis Reviews. 27, 263-272 (2008).
Derfus, A. M., Chan, W. C. W., Bhatia, S. N.
Adv. Mater. 16, 961-966 (2004).
Michalet, X., et al.
Science. 307, 538-544 (2005).
Dahan, M., et al.
Science. 302, 442-445 (2003).
Slowing, I. I., Trewyn, B. G., Lin, V. S. Y.
J. Am. Chem. Soc. 129,
Pack, D. W., Hoffman, A. S., Pun, S., Stayton, P. S.
Nat. Rev. Drug Discov. 4, 581-593 (2005).
Joseph, Z.
Advanced Drug Delivery Reviews. 27, (97), 17-28 (1997).
Verma, A., et al.
Nat. Mater. 7, 588-595 (2008).
Yan, M., et al.
Nat. Nano. 5, 48-53 (2010).
Shi Kam, N. W., Jessop, T. C., Wender, P. A., Dai, H.
J. Am. Chem. Soc. 126,
Varkouhi, A. K., Scholte, M., Storm, G., Haisma, H. J.
Journal of Controlled Release. 151, 220-228 (2011).
Current Gene Therapy. 4, 309-316 (2004).
Fox, M., et al.
Anal. Bioanal. Chem. 385, 474-485 (2006).
Miller, D. L., Pislaru, S. V., Greenleaf, J. F.
Somatic Cell and Molecular Genetics. 27, 115-134 (2002).
Sharei, A., et al.
Proc. Natl. Acad. Sci. U.S.A. 110,
Lee, J., et al.
Nano Lett. 12,
Video Stats
Get cutting-edge science videos from JoVE sent straight to your inbox every month.